MWS Fitment Guide | |||
Car | Triumph TR 6 | ||
Body | Sports | ||
Engine | 2498 cc / 6 cylinder | ||
Year | 1969 - 1974 |
Wheels | ||
Original | XW457 |
![]() |
Rim Size | 5½" x 15" | |
Centre | 42mm Curly | |
Number of Spokes | 72 | |
Finish | Stainless steel, chrome, silver-painted or black-painted | |
Lacing | Inner & Outer | |
Inset (mm) | 12.7 | |
Back Spacing (mm) | 95.5 (+/- 3) Click here to view an explanation of inset, outset and back spacing. |
|
Tyre | Originally fitted with 165R15 tyres (p.104 'Original Triumph TR4/4A/5/6' by Bill Piggott, 1998 edition) This tyre is now considered narrow for the rim; we would recommend a 185/70R15 would suit the rim width better and retain the same rolling radius. |
|
Tube | Tubeless The chrome wheels have been tubeless since December 2007; and the silver-painted wheels have been tubeless since April 2008. The stainless steel and black-painted wire wheels have always been tubeless. Tubes are only required if fitting tube-type tyres. If you have the older, tubed wheels or are fitting tube-type tyres you will need 175/185 x 15 tubes and we recommend 15"/16" rim bands. |
|
Notes | Wheels which are larger than the standard size might not fit into the spare wheel compartment. |
Options | XW5720 |
![]() |
XW5726 |
![]() |
||
Rim Size | 5½" x 15" | 6" x 15" | ||||
Centre | 42mm Curly | 42mm Curly | ||||
Number of Spokes | 70 | 70 | ||||
Finish | Chrome or silver-painted | Stainless steel, chrome or silver-painted | ||||
Lacing | Centre | Centre | ||||
Inset (mm) | 10 Outset | 10 Outset | ||||
Back Spacing (mm) | 73 (+/- 3) Click here to view an explanation of inset, outset and back spacing. |
79.5 (+/- 3) Click here to view an explanation of inset, outset and back spacing. |
||||
Tyre | 185/70R15 | 195/65R15 | ||||
Tube | Tubeless The chrome wheels have been tubeless since June 2006; and the silver-painted wheels have been tubeless since October 2009. If you have the older, tubed wheels or are fitting tube-type tyres you will need 175/185 x 15 tubes and we recommend 15/16" rim bands. | Tubeless This wheel has always been tubeless. Tubes are only required if fitting tube-type tyres. If you are using tube-type tyres or wish to fit a tube for any other reason then you will need 185-195/65 x 15 tubes and we recommend 15/16" rim bands. | ||||
Notes | Clearance is quite tight - a fitment check is recommended | Clearance is quite tight and the wheel might protrude from the bodywork. A fitment check is recommended. |
Notes | |||
Warranty | Stainless Steel and Chrome: two year structural and cosmetic Painted: two year structural and one year cosmetic The warranty period commences from the date of invoice and is subject to the wheels being maintained as per our Wheel Care advice and in conjunction with our Terms and Conditions. Please retain the warranty tag supplied with each wheel as it contains the information required to identify the wheel in the event of a claim. Please note: MWS warranty automatically becomes void if the wheels have been: subject to re-work or change; fitted with tyres other than the manufacturers recommended fitment; or used for track events. | ||
Splined Hubs | |||
Option 1 | RSTRL - Left RSTRR - Right Four RN716 per hub Bolt-on splines, unless fitted as original equipment, will increase the track by up to 1¼" per wheel Studs will require shortening, click here for a diagram Click here for a guide to fitting hubs, caps and centre-lock wire wheels |
Spinners | ||||||
Code | KCK303LH/KCK302RH |
![]() |
KCK053LH/KCK052RH |
![]() |
||
Type | Knock-on centre caps | Knock-on centre caps | ||||
Size | 42 mm | 42 mm | ||||
Thread | 8 TPI | 8 TPI | ||||
Ears | 2 | 2 | ||||
Logo | Triumph | Plain (no logo) | ||||
Notes | We recommend using our 42mm wooden spinner saver to protect the knock-on caps (spinners) when using a copper and hide hammer. XW5720 & XW5726 : Due to the positioning of the centre in relation to the rim you will require an extra-deep wooden spinner saver Click here for advice on how tight to apply spinners. |
We recommend using our 42mm wooden spinner saver to protect the knock-on caps (spinners) when using a copper and hide hammer. XW5720 & XW5726 : Due to the positioning of the centre in relation to the rim you will require an extra-deep wooden spinner saver Click here for advice on how tight to apply spinners. |
Retaining Nuts | |||
Extra Information | |||
Other comments | Always check the history of the vehicle to ensure that there have been no modifications to the running gear. Hubs/splines, spinners and nuts remain the same, unless noted otherwise, regardless of which wheel is fitted. We also stock wire wheel maintenance accessories such as our Cleaning Kit (Refills available), Cleaning Brush, Degreaser and Tyre Foam. If you require any more information or advice please contact us: UK - 01753 549 360 - e-mail Sales (info@mwsint.com) Overseas - +44 1753 598 382 - e-mail Isabella (isabella@mwsint.com) |
Pictures |
![]() XW457 Chrome |
![]() XW457 Silver-painted |
![]() XW457 Black-painted |
![]() XW5720 Chrome |
|
![]() TR6 fitted with... |
![]() ...XW5720 Chrome wire wheels... |
|
![]() ...and 195/65R15 tyres |
![]() XW5720 Silver-painted |
|
![]() XW5726 Stainless Steel |
![]() XW5726 Chrome |
|
![]() XW5726 Silver-painted |