| MWS Fitment Guide | |||
| Car | Daimler Sovereign and Double Six | ||
| Body | Four-door Saloon or Two-door Coupé |
|
|
| Engine | 2.8, 4.2 or 5.3 | ||
| Year | 1968 - 1993 | ||
| Wheels | ||
| Original | BXW715 |
|
| Rim Size | 6½" x 15" | |
| Centre | Five Stud 120.7 mm PCD | |
| Number of Spokes | 70 | |
| Finish | Chrome only | |
| Lacing | Inner & Outer | |
| Inset (mm) | 30 | |
| Back Spacing (mm) | 125.5 (+/- 3) Click here to view an explanation of inset, outset and back spacing. |
|
| Tyre | 205/70R15 Original tyre was a metric 220/65VR390 or 225/65ZR15 imperial |
|
| Tube | Tubeless This wheel has always been tubeless. Tubes are only required if fitting tube-type tyres. If you are using tube-type tyres or wish to fit a tube for any other reason then you will need 195/205 x 15 tubes to suit a 205/70R15 tyre or contact us if you are using any other size and we recommend 15"/16" rim bands. |
|
| Notes | Standard wheel was a Rostyle or alloy, did not have a wire wheel option originally. P.C.D. is the Pitch Circle Diameter and is the diameter of an imaginary circle drawn through the centres of the holes, click here for instructions on measuring PCDs All MWS bolt-on wire wheels are supplied with the appropriate nuts, caps and wrench. Replacement centre caps, replacement nuts requiring an external socket wrench, replacement nuts requiring an internal Allen key wrench and Daimler badges are available from stock. The wheels are not supplied with Daimler badges fitted to the caps, these must be purchased separately. For bolt-on wheel nuts the recommended torque is 75 ft lb (102 N m) but may vary depending on the vehicle. |
|
| Options | BXW791 |
|
||||
| Rim Size | 6½" x 15" | |||||
| Centre | Five Stud 120.7 mm PCD | |||||
| Number of Spokes | 70 | |||||
| Finish | Stainless steel only | |||||
| Lacing | Inner & Outer | |||||
| Inset (mm) | 30 | |||||
| Back Spacing (mm) | 125.5 (+/- 3) Click here to view an explanation of inset, outset and back spacing. |
|||||
| Tyre | 205/70R15 | |||||
| Tube | Tubeless This wheel has always been tubeless. Tubes are only required if fitting tube-type tyres. If you are using tube-type tyres or wish to fit a tube for any other reason then you will need 195/205 x 15 tubes and we recommend 15"/16” rim bands. | |||||
| Notes | P.C.D. is the Pitch Circle Diameter and is the diameter of an imaginary circle drawn through the centres of the holes, click here for instructions on measuring PCDs All MWS bolt-on wire wheels are supplied with the appropriate nuts, caps and wrench. Replacement centre caps, replacement nuts requiring an external socket wrench, replacement nuts requiring an internal Allen key wrench and Daimler badges are available from stock. The wheels are not supplied with Daimler badges fitted to the caps, these must be purchased separately. For bolt-on wheel nuts the recommended torque is 75 ft lb (102 N m) but may vary depending on the vehicle. | |||||
| Notes | |||
| Warranty | Stainless Steel and Chrome: two year structural and cosmetic The warranty period commences from the date of invoice and is subject to the wheels being maintained as per our Wheel Care advice and in conjunction with our Terms and Conditions. Please retain the warranty tag supplied with each wheel as it contains the information required to identify the wheel in the event of a claim. Please note: MWS warranty automatically becomes void if the wheels have been: subject to re-work or change; fitted with tyres other than the manufacturer’s recommended fitment; or used for track events. | ||
| Splined Hubs | |||
| Option 1 | Bolt-on wheels - no hubs required | ||
| Spinners | ||||||
| Code | KC715-731 |
|
KC746 |
|
KADAIMLERBADGE |
|
| Type | Bolt-on centre caps | Bolt-on centre caps | Badge for centre of cap | |||
| Size | ||||||
| Thread | ||||||
| Ears | ||||||
| Logo | ||||||
| Notes | For the BXW715 | For the BXW791 | ||||
| Retaining Nuts | |||
| Extra Information | |||
| Other comments | Always check the history of the vehicle to ensure that there have been no modifications to the running gear. Hubs/splines, spinners and nuts remain the same, unless noted otherwise, regardless of which wheel is fitted. We also stock wire wheel maintenance accessories such as our Cleaning Kit (Refills available), Cleaning Brush, Degreaser and Tyre Foam. If you require any more information or advice please contact us: UK - 01753 549 360 - e-mail Sales (info@mwsint.com) Overseas - +44 1753 598 382 - e-mail Isabella (isabella@mwsint.com) |
||
| Pictures |
 BXW715 Chrome |
|
 BXW791 Stainless Steel |
||