MWS Find Fitment Guide Entry

Wheels
Original	XW5726
Rim Size	6" x 15"
Centre	42mm Curly
Number of Spokes	70
Finish	Stainless steel, chrome, silver-painted or black-painted
Lacing	Centre
Inset (mm)	10 Outset
Back Spacing (mm)	79.5 (+/- 3) Click here to view an explanation of inset, outset and back spacing.
Tyre	195/65R15 or 205/70R15
Tube	Tubeless This wheel has always been tubeless. Tubes are only required if fitting tube-type tyres. If you are using tube-type tyres or wish to fit a tube for any other reason then you will need 195/205 x 15 tubes to suit a 205/70R15 tyre or contact us if you are using a 195/65R15 tyre. We recommend using 15"/16" rim bands.
Notes	This wheel is the successor to our discontinued XW470.

Notes
Warranty	Stainless Steel and Chrome: two year structural and cosmetic Painted: two year structural and one year cosmetic The warranty period commences from the date of invoice and is subject to the wheels being maintained as per our Wheel Care advice and in conjunction with our Terms and Conditions. Please retain the warranty tag supplied with each wheel as it contains the information required to identify the wheel in the event of a claim. Please note: MWS warranty automatically becomes void if the wheels have been: subject to re-work or change; fitted with tyres other than the manufacturer’s recommended fitment; or used for track events.
Splined Hubs
Option 1	Currently not available from MWS

Spinners
Code	KCK293LH/KCK292RH	KCK053LH/KCK052RH
Type	Knock-on centre caps	Knock-on centre caps
Size	42 mm	42 mm
Thread	8 TPI	8 TPI
Ears	2	2
Logo	AC	Plain (no logo)
Notes	Due to the positioning of the centre in relation to the rim we recommend using our extra-deep 42mm wooden spinner saver to protect the knock-on caps (spinners) when using a copper and hide hammer. Click here for advice on how tight to apply spinners.	Due to the positioning of the centre in relation to the rim we recommend using our extra-deep 42mm wooden spinner saver to protect the knock-on caps (spinners) when using a copper and hide hammer. Click here for advice on how tight to apply spinners.
Code	KCBR4283L/KCBR4283R
Type	Knock-on centre caps
Size	42 mm
Thread	8 TPI
Ears	3
Logo	Plain (no logo)
Notes	We recommend using our copper and hide hammer to tighten/loosen the knock-on caps (spinners). Click here for advice on how tight to apply spinners.

Retaining Nuts

Extra Information
Other comments	Most of the original model were fitted with peg drive wheels, some cars were fitted with wheels wider than the standard 6". The wheels used at Le Mans were of the same pattern as the Dunlop Magnesium wheels for the lightweight Jaguar E-Type. Always check the history of the vehicle to ensure that there have been no modifications to the running gear. Hubs/splines, spinners and nuts remain the same, unless noted otherwise, regardless of which wheel is fitted. We also stock wire wheel maintenance accessories such as our Cleaning Kit (Refills available), Cleaning Brush, Degreaser and Tyre Foam. If you require any more information or advice please contact us: UK - 01753 549 360 - e-mail Sales (info@mwsint.com) Overseas - +44 1753 598 382 - e-mail Isabella (isabella@mwsint.com)