MWS Find Fitment Guide Entry

Wheels
Original	XW5729 - preferred (see notes)
Rim Size	5½" x 13"
Centre	42mm Curly
Number of Spokes	60
Finish	Chrome only
Lacing	Centre
Inset (mm)	8
Back Spacing (mm)	89 (+/- 3) Click here to view an explanation of inset, outset and back spacing.
Tyre	185/70R13
Tube	Tubeless This wheel has always been tubeless. Tubes are only required if fitting tube-type tyres. If you are using tube-type tyres or wish to fit a tube for any other reason then please contact us and we recommend 13/14" rim bands.
Notes	Wire wheels were not a standard option when the vehicle was manufactured; supplied with steel or alloy wheels originally.

Notes
Warranty	Stainless Steel and Chrome: two year structural and cosmetic Painted: two year structural and one year cosmetic The warranty period commences from the date of invoice and is subject to the wheels being maintained as per our Wheel Care advice and in conjunction with our Terms and Conditions. Please retain the warranty tag supplied with each wheel as it contains the information required to identify the wheel in the event of a claim. Please note: MWS warranty automatically becomes void if the wheels have been: subject to re-work or change; fitted with tyres other than the manufacturer’s recommended fitment; or used for track events.
Splined Hubs
Option 1	RSSPL - Left RSSPR - Right Four RN1215 per hub Bolt-on splines, unless fitted as original equipment, will increase the track by up to 1¼" per wheel Studs will require shortening, click here for a diagram Click here for a guide to fitting hubs, caps and centre-lock wire wheels

Spinners
Code	KCK303LH/KCK302RH	KCK053LH/KCK052RH
Type	Knock-on centre caps	Knock-on centre caps
Size	42 mm	42 mm
Thread	8 TPI	8 TPI
Ears	2	2
Logo	Triumph	Plain (no logo)
Notes	Due to the positioning of the centre in relation to the rim we recommend using our extra-deep 42mm wooden spinner saver to protect the knock-on caps (spinners) when using a copper and hide hammer. Click here for advice on how tight to apply spinners.	Due to the positioning of the centre in relation to the rim we recommend using our extra-deep 42mm wooden spinner saver to protect the knock-on caps (spinners) when using a copper and hide hammer. Click here for advice on how tight to apply spinners.

Retaining Nuts

Extra Information
Other comments	Always check the history of the vehicle to ensure that there have been no modifications to the running gear. Hubs/splines, spinners and nuts remain the same, unless noted otherwise, regardless of which wheel is fitted. We also stock wire wheel maintenance accessories such as our Cleaning Kit (Refills available), Cleaning Brush, Degreaser and Tyre Foam. If you require any more information or advice please contact us: UK - 01753 549 360 - e-mail Sales (info@mwsint.com) Overseas - +44 1753 598 382 - e-mail Isabella (isabella@mwsint.com)