MWS Fitment Guide | |||
Car | Kit Car/Replica Lomax 223, 224, 424, Super Tourer, Variant, Lambda | ||
Body | 3 wheeler, 4 wheeler, using 2CV, Dyane 6, Ami 8, Ami Super or Mehari chassis | ||
Engine | 602 cc, 2 cyl; 1300 cc, 4 cyl | ||
Year | 1982 - |
Wheels | ||
Original | XW450 | |
Rim Size | 4" x 15" | |
Centre | 42mm Curly | |
Number of Spokes | 48 | |
Finish | Chrome or silver-painted | |
Lacing | Outer | |
Inset (mm) | 19 | |
Back Spacing (mm) | 83 (+/- 3) Click here to view an explanation of inset, outset and back spacing. |
|
Tyre | 155R15 or 165R15 | |
Tube | The chrome wheels have been tubeless since March 2019; and the silver-painted wheels have been tubeless since May 2018. If you have older, tubed wheels or are fitting tube-type tyres you will need 155/165 x 15 tubes - available with either metal (race) or rubber (road) valve This wheel is laced to the outer part of the rim only and so does not require a rim band |
|
Notes |
Notes | |||
Warranty | Stainless Steel and Chrome: two year structural and cosmetic Painted: two year structural and one year cosmetic The warranty period commences from the date of invoice and is subject to the wheels being maintained as per our Wheel Care advice and in conjunction with our Terms and Conditions. Please retain the warranty tag supplied with each wheel as it contains the information required to identify the wheel in the event of a claim. Please note: MWS warranty automatically becomes void if the wheels have been: subject to re-work or change; fitted with tyres other than the manufacturers recommended fitment; or used for track events. | ||
Splined Hubs | |||
Option 1 | RSK519 - Left RSK518 - Right Three RN12125 per hub Bolt-on splines, unless fitted as original equipment, will increase the track by up to 1¼" per wheel Studs will require shortening, click here for a diagram Click here for a guide to fitting hubs, caps and centre-lock wire wheels |
Spinners | ||||||
Code | KCK053LH/KCK052RH | KCK057-8LH/KCK056-8RH | ||||
Type | Knock-on centre caps | Knock-on centre caps | ||||
Size | 42 mm | 42 mm | ||||
Thread | 8 TPI | 8 TPI | ||||
Ears | 2 | 0 | ||||
Logo | Plain (no logo) | Plain (no logo) | ||||
Notes | We recommend using our 42mm wooden spinner saver to protect the knock-on caps (spinners) when using a copper and hide hammer. Click here for advice on how tight to apply spinners. |
Continental style octagonal spinner Requires a spinner spanner to tighten/loosen caps. Click here for advice on how tight to apply spinners. |
Retaining Nuts | |||
Extra Information | |||
Other comments | This kit car is Citroen 2CV based. For more information contact the manufacturer, Cradley Motor Works, or the Citroen Specials Club Always check the history of the vehicle to ensure that there have been no modifications to the running gear. Hubs/splines, spinners and nuts remain the same, unless noted otherwise, regardless of which wheel is fitted. We also stock wire wheel maintenance accessories such as our Cleaning Kit (Refills available), Cleaning Brush, Degreaser and Tyre Foam. If you require any more information or advice please contact us: UK - 01753 549 360 - e-mail Sales (info@mwsint.com) Overseas - +44 1753 598 382 - e-mail Isabella (isabella@mwsint.com) |
Pictures |
XW450 Chrome |
XW450 Silver-painted |