MWS Find Fitment Guide Entry

Wheels
Original	XW455
Rim Size	5" x 15"
Centre	52mm Curly
Number of Spokes	72
Finish	Stainless steel, chrome or silver-painted
Lacing	Inner & Outer
Inset (mm)	20.6
Back Spacing (mm)	97 (+/- 3) Click here to view an explanation of inset, outset and back spacing.
Tyre	6.00 or 6.40 x 15 (original Dunlop crossply) or 185R15 (modern radial)
Tube	Tubeless The chrome wheels have been tubeless since October 2006; the silver-painted wheels have been tubeless since July 2007; and the stainless steel wheels have been tubeless since April 2008. If you have the older, tubed wheels or are fitting tube-type tyres you will need 175/185 x 15 tubes and we recommend 15"/16" rim bands.
Notes	Wire wheels were never officially available for the TA21. They became an option for the TC21 and were standardized for the TC21/100. The TD21 was originally fitted with 4½" x 15" wire wheels but after numerous problems the factory uprated them to the XW455.

Notes
Warranty	Stainless Steel and Chrome: two year cosmetic and three year structural Painted: one year cosmetic and two year structural The warranty period commences from the date of invoice and is subject to the wheels being maintained as per our Wheel Care advice and in conjunction with our Terms and Conditions. Please retain the warranty tag supplied with each wheel as it contains the information required to identify the wheel in the event of a claim. Please note: MWS warranty automatically becomes void if the wheels have been: subject to re-work or change; fitted with tyres other than the manufacturer’s recommended fitment; or used for track events.
Splined Hubs
Option 1	Please contact us if you have drum brakes on the front RSK385 - Front Left (Disc) RSK384 - Front Right (Disc) RSK355 - Rear Left (Drum) RSK354 - Rear Right (Drum) RSK387 - Rear Left (Disc) RSK386 - Rear Right (Disc) Integral fitting hubs so no nuts necessary Click here for a guide to fitting hubs, caps and centre-lock wire wheels

Spinners
Code	KCK383LH/KCK382RH	KCK139LH/KCK140RH
Type	Knock-on centre caps	Knock-on centre caps
Size	52 mm	52 mm
Thread	8 TPI	8 TPI
Ears	2	2
Logo	Alvis	Plain (no logo)
Notes	We recommend using our 52mm wooden spinner saver to protect the knock-on caps (spinners) when using a copper and hide hammer. Click here for advice on how tight to apply spinners.	We recommend using our 52mm wooden spinner saver to protect the knock-on caps (spinners) when using a copper and hide hammer. Click here for advice on how tight to apply spinners.
Code	KCK317LH/KCK316RH
Type	Knock-on centre caps
Size	52 mm
Thread	8 TPI
Ears	0
Logo	Plain (no logo)
Notes	Federal style spinner Requires a spinner spanner to tighten/loosen caps. Click here for advice on how tight to apply spinners.

Retaining Nuts

Extra Information
Other comments	Always check the history of the vehicle to ensure that there have been no modifications to the running gear. Hubs/splines, spinners and nuts remain the same, unless noted otherwise, regardless of which wheel is fitted. We also stock wire wheel maintenance accessories such as our Cleaning Kit (Refills available), Cleaning Brush, Degreaser and Tyre Foam. If you require any more information or advice please contact us: UK - 01753 549 360 - e-mail Sales (info@mwsint.com) Overseas - +44 1753 598 382 - e-mail Isabella (isabella@mwsint.com)