Click here to view an explanation of inset, outset and back spacing.
You will require 13"/14" rim bands
| MWS Fitment Guide | |||
| Car | Rover 2000 P6 | ||
| Body | Saloon | ||
| Engine | 1998cc | ||
| Year | 1963 - 1973 | ||
| Wheels | ||
| Original | XW5920 |
|
| Rim Size | 5" x 14" | |
| Centre | 52mm Curly | |
| Number of Spokes | 72 | |
| Finish | Silver-painted only | |
| Lacing | Inner & Outer | |
| Inset (mm) | 21.5 | |
| Back Spacing (mm) | 98 (+/- 3) Click here to view an explanation of inset, outset and back spacing. |
|
| Tyre | 165R14 (original) or 175R14 | |
| Tube | 155/165R14 or 165/175R14 tubes You will require 13"/14" rim bands |
|
| Notes | Wire wheels were not a factory option for this vehicle | |
| Notes | |||
| Warranty | Painted: two year structural and one year cosmetic The warranty period commences from the date of invoice and is subject to the wheels being maintained as per our Wheel Care advice and in conjunction with our Terms and Conditions. Please retain the warranty tag supplied with each wheel as it contains the information required to identify the wheel in the event of a claim. Please note: MWS warranty automatically becomes void if the wheels have been: subject to re-work or change; fitted with tyres other than the manufacturer’s recommended fitment; or used for track events. | ||
| Splined Hubs | |||
| Option 1 | RSK517 - Front Left RSK516 - Front Right RSK515 - Rear Left RSK514 - Rear Right Integral fitting hubs so no nuts necessary Click here for a guide to fitting hubs, caps and centre-lock wire wheels | ||
| Spinners | ||||||
| Code | KCK650RH/KCK651LH |
|
||||
| Type | Knock-on centre caps - Steel | |||||
| Size | 52 mm | |||||
| Thread | 8 TPI | |||||
| Ears | 0 | |||||
| Logo | Plain (no logo) | |||||
| Notes | Rover 10-sided spinner Requires a special spinner spanner to tighten/loosen caps (not available from MWS) | |||||
| Retaining Nuts | |||
| Extra Information | |||
| Other comments | Always check the history of the vehicle to ensure that there have been no modifications to the running gear. Hubs/splines, spinners and nuts remain the same, unless noted otherwise, regardless of which wheel is fitted. We also stock wire wheel maintenance accessories such as our Cleaning Kit (Refills available), Cleaning Brush, Degreaser and Tyre Foam. If you require any more information or advice please contact us: UK - 01753 549 360 - e-mail Sales (info@mwsint.com) Overseas - +44 1753 598 382 - e-mail Isabella (isabella@mwsint.com) |
||
| Pictures | ||