MWS Fitment Guide
Car MG F
Body Sports, 2 seater
Engine 1.8i, V V C
Year 1995 - 1999
Wheels
Original BXW749
Rim Size 7" x 16"
Centre Four Stud 95.3 mm PCD
Number of Spokes 64
Finish Stainless steel only

This wheel used to be available in chrome; the chrome wheel was superseded by the stainless steel wheel in 2006.
Lacing Inner & Outer
Inset (mm) 32
Back Spacing (mm) 134 (+/- 3)

Click here to view an explanation of inset, outset and back spacing.
Tyre Front : 195/45R16
Rear : 215/40R16

The vehicle performs best with 215/40R16 tyres at the rear, however, 205/45R16 could be fitted. Goodyear tyres are recommended.
Tube Tubeless

This wheel has always been tubeless.
Notes The standard wheel for the 1.8i and VVC is a 6" x 15" alloy wheel, with 185/55VR15 tyres at the front and 205/50VR15 tyres at the rear.

P.C.D. is the Pitch Circle Diameter and is the diameter of an imaginary circle drawn through the centres of the holes, click here for instructions on measuring PCDs

All MWS bolt-on wire wheels are supplied with the appropriate nuts, caps and wrench. Replacement centre caps, replacement nuts requiring an external socket wrench and nuts requiring an internal Allen key wrench are available from stock.

For bolt-on wheel nuts the recommended torque is 75 ft lb (102 N m) but may vary depending on the vehicle.
Notes
WarrantyStainless Steel and Chrome: two year structural and cosmetic

The warranty period commences from the date of invoice and is subject to the wheels being maintained as per our Wheel Care advice and in conjunction with our Terms and Conditions. Please retain the warranty tag supplied with each wheel as it contains the information required to identify the wheel in the event of a claim.

Please note: MWS warranty automatically becomes void if the wheels have been: subject to re-work or change; fitted with tyres other than the manufacturer’s recommended fitment; or used for track events.
Splined Hubs
Option 1Bolt-on wheels - no hubs required
Spinners
Code KC749
Type Bolt-on centre caps
Size
Thread
Ears
Logo
Notes
Retaining Nuts
 
Extra Information
Other comments The BXW749 has been designed for MGF 1.8i and VVC (factory fitted with 6x15" alloy wheels).

Models thereafter, including the special Limited Edition Abingdon LE, have been factory fitted with 16" alloy wheels.

MWS has not tested or verified the BXW749 on models thereafter - a fitment check is recommended.

Always check the history of the vehicle to ensure that there have been no modifications to the running gear.

Hubs/splines, spinners and nuts remain the same, unless noted otherwise, regardless of which wheel is fitted.

We also stock wire wheel maintenance accessories such as our Cleaning Kit (Refills available), Cleaning Brush, Degreaser and Tyre Foam.

If you require any more information or advice please contact us:

UK - 01753 ­549 ­360 - e-mail Sales (info@mwsint.com)

Overseas - +44 ­1753 ­598 ­382 - e-mail Isabella (isabella@mwsint.com)
Pictures
BXW749 Chrome (discontinued)

BXW749 Stainless Steel