Click here to view an explanation of inset, outset and back spacing.
This wheel is laced to the outer part of the rim only and so does not require a rim band
| MWS Fitment Guide | |||
| Car | MG VA | ||
| Body | Saloon | ||
| Engine | 1549 cc, 4 cylinder | ||
| Year | 1936 - 1939 | ||
| Wheels | ||
| Original | WW5940 |
|
| Rim Size | 3" x 19" Rolled Edge | |
| Centre | 42mm Vintage One-piece Plain | |
| Number of Spokes | 60 | |
| Finish | Silver-painted only | |
| Lacing | Outer | |
| Inset (mm) | 18.5 Outset | |
| Back Spacing (mm) | 38.1 (+/- 1.5) Click here to view an explanation of inset, outset and back spacing. |
|
| Tyre | 500 x 19 - we recommend the Blockley but can source other brands if required | |
| Tube | 450/500 x 19 tubes - available with either metal (race) or rubber (road) valve This wheel is laced to the outer part of the rim only and so does not require a rim band |
|
| Notes | ||
| Notes | |||
| Warranty | Painted: two year structural and one year cosmetic The warranty period commences from the date of invoice and is subject to the wheels being maintained as per our Wheel Care advice and in conjunction with our Terms and Conditions. Please retain the warranty tag supplied with each wheel as it contains the information required to identify the wheel in the event of a claim. Please note: MWS warranty automatically becomes void if the wheels have been: subject to re-work or change; fitted with tyres other than the manufacturer’s recommended fitment; or used for track events. | ||
| Splined Hubs | |||
| Option 1 | RSK197 - Front Left RSK196 - Front Right RSK199 - Rear Left RSK198 - Rear Right New rear half shafts are required when using these hubs - please contact us for more information Integral fitting hubs so no nuts necessary Click here for a guide to fitting hubs, caps and centre-lock wire wheels | ||
| Spinners | ||||||
| Code | KCK051LH/KCK050RH |
|
KCK057-12MGLH/KCK056-12MGRH |
|
||
| Type | Knock-on centre caps | Knock-on centre caps | ||||
| Size | 42 mm | 42 mm | ||||
| Thread | 12 TPI | 12 TPI | ||||
| Ears | 2 | 0 | ||||
| Logo | MG | MG | ||||
| Notes | We recommend using our 42mm wooden spinner saver to protect the knock-on caps (spinners) when using a copper and hide hammer. Click here for advice on how tight to apply spinners. |
Continental style octagonal spinner Requires a spinner spanner to tighten/loosen caps. Click here for advice on how tight to apply spinners. |
||||
| Code | KCK049LH/KCK048RH |
|
KCK057-12LH/KCK056-12RH |
|
||
| Type | Knock-on centre caps | Knock-on centre caps | ||||
| Size | 42 mm | 42 mm | ||||
| Thread | 12 TPI | 12 TPI | ||||
| Ears | 2 | 0 | ||||
| Logo | Plain (no logo) | Plain (no logo) | ||||
| Notes | We recommend using our 42mm wooden spinner saver to protect the knock-on caps (spinners) when using a copper and hide hammer. Click here for advice on how tight to apply spinners. |
Continental style octagonal spinner Requires a spinner spanner to tighten/loosen caps. Click here for advice on how tight to apply spinners. |
||||
| Retaining Nuts | |||
| Extra Information | |||
| Other comments | Always check the history of the vehicle to ensure that there have been no modifications to the running gear. Hubs/splines, spinners and nuts remain the same, unless noted otherwise, regardless of which wheel is fitted. We also stock wire wheel maintenance accessories such as our Cleaning Kit (Refills available), Cleaning Brush, Degreaser and Tyre Foam. If you require any more information or advice please contact us: UK - 01753 549 360 - e-mail Sales (info@mwsint.com) Overseas - +44 1753 598 382 - e-mail Isabella (isabella@mwsint.com) |
||
| Pictures |
 WW5940 Silver-painted |
|