Click here to view an explanation of inset, outset and back spacing.
18"/19" rim bands
| MWS Fitment Guide | |||
| Car | MG SA | ||
| Body | Saloon, Tourer or Drophead Coupé | ||
| Engine | 2 Litre (2062 cc) | ||
| Year | 1936 - 1939 | ||
| Wheels | ||
| Original | WW5950 |
|
| Rim Size | 3¼" x 18" Rolled Edge | |
| Centre | 52mm Vintage One-piece Plain | |
| Number of Spokes | 72 | |
| Finish | Silver-painted only | |
| Lacing | Two Line | |
| Inset (mm) | 21.2 (Outset) | |
| Back Spacing (mm) | 38.1 (+/- 1.5) Click here to view an explanation of inset, outset and back spacing. |
|
| Tyre | 550 x 18 - we recommend the Blockley but can source other brands if required | |
| Tube | 550/600 x 17/18 tubes - available with metal (race) or rubber (road) valve 18"/19" rim bands |
|
| Notes | ||
| Notes | |||
| Warranty | Painted: two year structural and one year cosmetic The warranty period commences from the date of invoice and is subject to the wheels being maintained as per our Wheel Care advice and in conjunction with our Terms and Conditions. Please retain the warranty tag supplied with each wheel as it contains the information required to identify the wheel in the event of a claim. Please note: MWS warranty automatically becomes void if the wheels have been: subject to re-work or change; fitted with tyres other than the manufacturer’s recommended fitment; or used for track events. | ||
| Splined Hubs | |||
| Option 1 | RSK205 - Front Left RSK204 - Front Right RSK207 - Rear Left RSK206 - Rear Right Integral fitting hubs so no nuts necessary Click here for a guide to fitting hubs, caps and centre-lock wire wheels | ||
| Spinners | ||||||
| Code | KCK139LH/KCK140RH |
|
KCK1004LH/KCK1003RH | |||
| Type | Knock-on centre caps | Knock-on centre caps | ||||
| Size | 52 mm | 52 mm | ||||
| Thread | 8 TPI | 8 TPI | ||||
| Ears | 2 | 2 | ||||
| Logo | Plain (no logo) | MG | ||||
| Notes | We recommend using our 52mm wooden spinner saver to protect the knock-on caps (spinners) when using a copper and hide hammer. Click here for advice on how tight to apply spinners. |
We recommend using our 52mm wooden spinner saver to protect the knock-on caps (spinners) when using a copper and hide hammer. Click here for advice on how tight to apply spinners. |
||||
| Retaining Nuts | |||
| Extra Information | |||
| Other comments | Click here to go to the information page for this car on the MG Owners' Club website (MWS takes no responsibility for the content of external websites.) Always check the history of the vehicle to ensure that there have been no modifications to the running gear. Hubs/splines, spinners and nuts remain the same, unless noted otherwise, regardless of which wheel is fitted. We also stock wire wheel maintenance accessories such as our Cleaning Kit (Refills available), Cleaning Brush, Degreaser and Tyre Foam. If you require any more information or advice please contact us: UK - 01753 549 360 - e-mail Sales (info@mwsint.com) Overseas - +44 1753 598 382 - e-mail Isabella (isabella@mwsint.com) |
||
| Pictures |
 |
|