MWS Fitment Guide | |||
Car | Jaguar SS 1½ Litre (Mk IV) | ||
Body | Saloon | ||
Engine | 1608 or 1776 cc / 4 cylinder | ||
Year | 1936 - 1949 |
Wheels | ||
Original | WW5984 | |
Rim Size | 3¼" x 18" Rolled Edge | |
Centre | 42mm Vintage One-piece Ribbed | |
Number of Spokes | 60 | |
Finish | Chrome or silver-painted | |
Lacing | Outer | |
Inset (mm) | 5.3 (Outset) | |
Back Spacing (mm) | 54 (+/- 1.5) Click here to view an explanation of inset, outset and back spacing. |
|
Tyre | 550 x 18 - we recommend the Blockley but can source other brands if required | |
Tube | 550/600 x 17/18 tubes - available with either metal (race) or rubber (road) valve This wheel is laced to the outer part of the rim only and so does not require a rim band |
|
Notes | Please double-check before ordering as later cars have type 52mm centres |
Notes | |||
Warranty | Chrome: two year structural and cosmetic Painted: two year structural and one year cosmetic The warranty period commences from the date of invoice and is subject to the wheels being maintained as per our Wheel Care advice and in conjunction with our Terms and Conditions. Please retain the warranty tag supplied with each wheel as it contains the information required to identify the wheel in the event of a claim. Please note: MWS warranty automatically becomes void if the wheels have been: subject to re-work or change; fitted with tyres other than the manufacturers recommended fitment; or used for track events. | ||
Splined Hubs | |||
Option 1 | RSK367 - Front Left RSK366 - Front Right RSK311 - Rear Left RSK312 - Rear Right Click here for a guide to identifying hub sizes Integral fitting hubs so no nuts necessary Click here for a guide to fitting hubs, caps and centre-lock wire wheels |
Spinners | ||||||
Code | KCK053LH/KCK052RH | |||||
Type | Knock-on centre caps | |||||
Size | 42 mm | |||||
Thread | 8 TPI | |||||
Ears | 2 | |||||
Logo | Plain (no logo) | |||||
Notes | These cars would have had Jaguar logo spinners originally, these may be available to special order, please Contact us We recommend using our 42mm wooden spinner saver to protect the knock-on caps (spinners) when using a copper and hide hammer. Click here for advice on how tight to apply spinners. |
Retaining Nuts | |||
Extra Information | |||
Other comments | Always check the history of the vehicle to ensure that there have been no modifications to the running gear. Hubs/splines, spinners and nuts remain the same, unless noted otherwise, regardless of which wheel is fitted. We also stock wire wheel maintenance accessories such as our Cleaning Kit (Refills available), Cleaning Brush, Degreaser and Tyre Foam. If you require any more information or advice please contact us: UK - 01753 549 360 - e-mail Sales (info@mwsint.com) Overseas - +44 1753 598 382 - e-mail Isabella (isabella@mwsint.com) |
Pictures |
WW5984 Chrome |
WW5984 Silver-painted |