+44 (0)1753 549 360
You are here : Tyre Fitting : Fitting Tyres
Fitting Tyres
Crossply & Radial Tyres
Straight-sided tyres
Beaded-edge Tyres
Uniflate Nitrogen Tyre Inflation
Tyre Information
Blockley Tyre Company

Fitting Tyres

Tubes must always be fitted to centre-lock and bolt-on wire wheels unless the wheels can be confirmed as tubeless

Rim bands are also required unless the wheel is outer-laced or has an application of sealant covering the spoke heads.
The application of sealant over the spoke heads was introduced several years ago for cosmetic reasons to stop rusty water from the rim well running down the spokes. This was before tubeless wire wheels were developed so please check before fitting.
Tyre fitters should always be warned to take extra care when fitting tyres to tubed or tubeless wire wheels with sealant as damage may occur to the sealant during the fitting process and this can cause the tyre to deflate.
Applying sealant to the rim well does not make a tubed wheel tubeless

MWS tubeless wheels are supplied with the valve fitted.
MWS recommends that tyres are always fitted by professionals who have the required equipment and experience.
UK Sales: 01753 549 360
UK Fax: 01753 547 170
  • Italian
  • German
  • french
  • spanish
Export Sales: +44 (0) 1753 598 382
Motor Wheel Service International Ltd, Units 1-4 Elder Way, Waterside Drive, Langley, Slough, Berkshire, SL3 6EP, UK
Sitemap | Webmaster | Contact Us | Terms and Conditions | Powered by vcGenius