Enquire
+44 (0)1753 549 360
Home
You are here : Information & Advice : Technical information : Wheel Centre Sizes
About MWS
MWS Wire Wheels
Fitting Wire Wheels
Fitment Guide
Technical information
Inset, Outset & Back Spacing
Calculating P.C.D.
Wheel Centre Sizes
Spoke Sizes
Worn Hub Diameters
Torque Guide
News
Gallery
Methods of Payment
Delivery Information
Terms and Conditions
FAQ

Wheel Centre Sizes


Wheel Type
Note 1
Actual Hub Diameter
Note 2
Number of Splines Spline Length
Short Hub
Spline Length
Long Hub
32 52 mm 62 36 mm 56 mm
42 62.5 mm 75 37 mm 62 mm
52 73 mm 88 37 mm 62 mm
62 82.5 mm 100 57 mm 78 mm
72 92 mm 112 55 mm 84 mm
80 102 mm 124 58 mm 87 mm
90 111.5 mm 136 56 mm 94 mm
100 123 mm 150 59 mm 97 mm
120 137 mm 168 63 mm 101 mm

 
Note 1:  The wheel type designation refers to the maximum size of outer bearing, in millimetres, which can be used with that hub.
 
Note 2:  Actual hub diameter is measured across the outside of the splines on the car and not the wheel itself. Dimensions are ±½mm.

In Europe most splined hubs are of the Rudge-Whitworth type having V-shaped serrations with dimensions as above.

On Rolls-Royces, and in America, you may find RAF type hubs which have square splines.

UK Sales: 01753 549 360
UK Fax: 01753 547 170
  • Italian
  • German
  • french
  • spanish
Export Sales: +44 (0) 1753 598 382
Motor Wheel Service International Ltd, Units 1-4 Elder Way, Waterside Drive, Langley, Slough, Berkshire, SL3 6EP, UK
Sitemap | Webmaster | Contact Us | Terms and Conditions | Powered by vcGenius